Weboldalunk használatával jóváhagyja a cookie-k használatát a Cookie-kkal kapcsolatos irányelv értelmében. Elfogadom

K5102 Kitronik Digital Barometer Breakout Board (MPL115A2)

2.750 Ft (2.165 Ft + ÁFA)
Átlagos értékelés: Nem értékelt
Elérhetőség: Raktáron

Kitronik 5102 Kitronik Digital Barometer Breakout Board (MPL115A2)



Kitronik 5102 Kitronik Digital Barometer Breakout Board (MPL115A2)


This board uses a MPL115A2 digital barometer which can provide a temperature compensated pressure reading. The sensor can measure pressures between 50 kPa to 115 kPa Absolute Pressure with an accuracy of ±1 kPa. The board supports a wide range of input voltages (2.4V – 5.5V) and uses I2C. When selecting an input voltage to use, keep in mind that pulling the SHDN and RST pins above the input voltage will cause malfunctions. On board I2C bus pull-ups are included and can be enabled by attaching a jumper across PL2.


  • Absolute Pressure measurement from 50 kPa to 115 kPa.
  • Wide supply voltage range.
  • Digital readout via I2C.


  • 1 x Digital Barometer Breakout Board.

Possible applications include:

  • Weather stations.


  • Length: 28mm.
  • Width: 28mm.
  • Height: 3mm.


  • SDA - I2C data
  • SCL - I2C clock
  • Vcc - Supply voltage (2.375-5.5V)
  • GND - Ground pin (0V)
  • SHDN - Shutdown pin (Active low)
  • RST - Reset Pin (Active low)


Technical Information

Attribute Value
Length 28mm.
Width 28mm.
Height 3mm.
Min supply voltage 2.375V
Typical supply voltage 3.3V
Max supply voltage 5.5V
Typical current consumption 5uA
Range 50kPa to 115kPa
Resolution 0.15kPa
Accuracy ±1 kPa
Typical conversion time 1.6ms


Erről a termékről még nem érkezett vélemény.
Írja meg véleményét!